Attic Spray Foam Insulation Calvert, TX 77837 | College Station Spray Foam Insulation

Spray Foam Insulation in Calvert, TX (77837) · Local Professionals

College Station Spray Foam Insulation · Fast response in Calvert and the College Station area · Free estimate 24h

✅ Written Estimates with R-Value & Thickness Specs 🛡️ Fully Insured 💸 Free Quote 24h 🕐 Mon-Sat 7am-6pm

+29Verified Reviews

14Years in Business

4.9 ★Google Rating

24/7Available

Calvert's historic homes sit on pier-and-beam foundations over open crawl spaces, with tall walls and attics that run 140 to 160 degrees Fahrenheit through the long, humid Brazos Valley summers. If your energy bills have climbed, or if you're seeing condensation on the underside of your metal roof or damp insulation in the crawl space below, spray foam insulation and air sealing are the tools that work here.

College Station Spray Foam Insulation has served Calvert and the surrounding area since 2012. We know the construction style of your home, the moisture challenges that come with it, and the code requirements that apply to your address. We show up with insured crews, deliver a written estimate with R-value and thickness specifications, and leave your property clean.

Spray Foam Insulation in Calvert (77837)

Calvert's older homes were built to breathe, not to seal. Pier-and-beam foundations create open crawl spaces where moisture collects and insulation compresses or rots. Attics are vented, which means the ductwork and water lines that run through them are exposed to extreme heat and humidity. Walls often have no cavity insulation at all, so a bedroom or a back corner of the house stays cold in winter and hot in summer no matter what the thermostat says. Metal buildings and barndominiums in the county sweat and drip without closed-cell foam to stop the condensation.

Spray foam seals these spaces. Closed-cell foam stops moisture and holds an R-value of 6 to 7 per inch. Open-cell foam is softer, breathes a little, and runs R-3.5 to R-3.8 per inch. Wall injection foam reaches into cavities that are already closed. Air sealing around rim joists, band joists, and ductwork stops the leaks that no amount of insulation can fix. We've been doing this work in Calvert and College Station long enough to know which tool fits which job, and to explain it plainly.

Our services in Calvert

How a Job Works in Calvert

You call us at (979) 406-5185 or send a message. We schedule a free on-site assessment. We walk the attic, the crawl space, the walls, or the metal building. We look at what's there now, what has to come out, what the space will take, and what the local building code requires for R-value, thickness, and thermal barriers at your address. We measure, we ask questions, and we leave you with a written estimate that spells out the R-value, the thickness per pass, the square footage or board footage, and the price.

On the day of the work, we set up mechanical ventilation. Spray foam releases VOCs as it cures, and we keep the air moving. We spray in controlled passes, hold the thickness spec, and verify the drum temperature and mix ratio. Once we're done, we clean up. You'll have a re-entry window of twenty-four to forty-eight hours before the space is safe to occupy again, and we'll tell you exactly what that means for your home.

If there's old, wet, or contaminated insulation in the way, we remove it first. We don't spray over a damp substrate, and we don't cut corners on prep. If the moisture has to be fixed before we start, we walk away and tell you so. That's how you know the job will hold.

Attic spray foam in Calvert typically starts at $1.50 per square foot for open-cell, with closed-cell costing more depending on thickness and R-value. Wall injection foam for closed cavities starts at $2 per square foot. Crawl space work, which is common under Calvert's pier-and-beam homes, starts at $2,500. Rim joist and band joist sealing starts at $650. If you have old, compressed, or rodent-fouled insulation that has to come out first, removal starts at $950, and the total cost of removal and replacement starts at $2,800. The real variables are the area to cover, the R-value your code requires, the thickness per pass, whether you choose open or closed cell, and what condition the space is in when we arrive. We'll give you a firm, itemized price in writing before we start. Call us at (979) 406-5185 for a free estimate.

✅ Written Estimates with R-Value & Thickness Specs, fully insured for work in Calvert and nearby areas.

My Calvert home sits on pier-and-beam with a crawl space underneath. The insulation down there is compressed and damp. What do we do?

Crawl spaces under pier-and-beam homes are the most common problem we see in Calvert. The space stays damp because it's vented and open to the humid air. Compressed or moldy insulation has to come out before anything new goes in. We remove it, we inspect the rim joist and band joist for air leaks, and we seal those with spray foam. Then we spray the band joist and the rim area with closed-cell foam, which stops moisture and holds an R-value. If the crawl space floor itself needs insulation, we can spray that too. The whole job typically runs $2,500 and up, depending on the square footage and what we find. Call us at (979) 406-5185 to schedule a free crawl space assessment.

I see condensation dripping off the underside of my metal building roof. What's happening, and can spray foam fix it?

Metal buildings sweat because the roof is cold on the outside and warm and humid on the inside. The air inside can't hold all that moisture, so it condenses on the metal. Closed-cell spray foam stops this by creating an air barrier between the warm interior and the cold roof surface. It also holds an R-value, so you save on heating and cooling. The foam has to be sprayed directly to the underside of the roof deck or to the metal purlins, depending on the structure. We'll assess the building, specify the thickness and R-value, and give you a firm price. This is one of the most reliable fixes we do.

How much does it cost to spray foam an attic in Calvert?

Attic foam starts at $1.50 per square foot for open-cell. Closed-cell costs more. The total depends on the square footage, the R-value your code requires, and the thickness per pass. A typical attic might be 1,200 to 1,500 square feet, so you're looking at a ballpark of $1,800 to $2,250 for open-cell, or more for closed-cell if you're going for a higher R-value or if old insulation has to come out first. We'll measure your attic, confirm the R-value required by your local code, and give you a written price. Call (979) 406-5185 for a free estimate.

Who sets the R-value and thermal barrier requirements for spray foam in Calvert, and how do I know if my job will pass inspection?

The energy and building code in force at your address governs R-value, ignition barriers, and thermal barriers. In Calvert, that's a question for Robertson County or your local building official. The thermal barrier is often the detail that trips up generalists: closed-cell foam cures in fifteen minutes and can be left exposed in some applications, but open-cell requires a one-half-inch gypsum board or equivalent thermal barrier in many jurisdictions. We specify the R-value and thickness you need in writing, and we follow the code as it applies to your address. If you have questions about what's required, contact the Robertson County building department or check the official city resources at https://www.co.robertson.tx.us. We'll work with whatever your inspector requires.

Can we stay in the house while you're spraying foam in the attic?

Yes, but there are rules. We set up mechanical ventilation to pull VOCs out of the attic and vent them outside. We keep doors closed and windows open in other parts of the house. The re-entry window is twenty-four to forty-eight hours, meaning you shouldn't go into the attic or the sprayed space until the foam has fully cured and the smell has cleared. If you have a young child or a pet, or if anyone in the house has respiratory sensitivity, let us know and we'll coordinate the timing. Most jobs are done in a day, and you're back to normal by the next morning.

Are you fully insured if something goes wrong during the spray foam work at my Calvert home?

Yes. We carry general liability and workers' compensation insurance. Before we start, we'll show you proof of coverage. If there's any damage to your property or anyone is injured, our insurance covers it. That's standard for any contractor doing this work.

Summer electricity bills in Calvert get brutal. When is the best time to have spray foam installed, and how much will it actually save?

The best time is spring or early summer, before the heat peaks. You'll feel the difference in July and August. How much you notice depends on how much air leakage and poor insulation you had to start with. An attic that's properly sealed and insulated will run cooler, your air conditioner won't work as hard, and your bill will drop. A bedroom that was always hot will finally cool down. The payoff is real, but it comes over time, not overnight. Call us at (979) 406-5185 and we'll walk through what you can expect based on your home.